Rev. 0.1 2/06 Copyright © 2006 by Silicon Laboratories CP2201-EKCP2201-EKCP2201EK USER’S GUIDE1. Kit ContentsThe CP2201 Evaluation kit contains the
CP2201-EK10 Rev. 0.1APPENDIX A—USING A CROSSOVER CABLEThe CP2201EB can be connected to an Ethernet network using a standard Ethernet cable (see Figure
CP2201-EKRev. 0.1 11PC ConfigurationConfigure the PC to have a static IP address. The steps below show how to configure a Windows PC to use a staticIP
CP2201-EK12 Rev. 0.1Selecting an IP Address for the Embedded SystemFor a PC to recognize an embedded system on a network, its IP address and subnet ma
CP2201-EKRev. 0.1 13APPENDIX B—SCHEMATIC
CP2201-EK14 Rev. 0.1CONTACT INFORMATIONSilicon Laboratories Inc.4635 Boston LaneAustin, TX 78735Email: [email protected]: www.silabs.comSilic
CP2201-EK2 Rev. 0.13. Hardware SetupThe only external hardware connections required by the CP2201EB are power and a connection to a network. Allrequi
CP2201-EKRev. 0.1 32. If the CP2201EB was able to automatically obtain an IP address through DHCP, then its IP address will appear inside a window wit
CP2201-EK4 Rev. 0.15. If the network does not have a DHCP server, then the CP2201EB will search for approximately 35 seconds before going into static
CP2201-EKRev. 0.1 57. Close the ‘Assign IP Address’ dialog then press Search to refresh the Netfinder screen. Select the device by clicking inside the
CP2201-EK6 Rev. 0.16. CP2201 Evaluation Kit DemoThe CP2201EK demo includes: Monitoring real-time sensor data using a web browser. Controlling the s
CP2201-EKRev. 0.1 7Clicking the second link on the main web page ‘2. Control Yellow LED’ will load the yellow LED control page shownin Figure 10. Each
CP2201-EK8 Rev. 0.16.4. Monitoring Real Time Sensor Data Using the Telnet InterfaceThe temperature and light sensor data can be monitored using the c
CP2201-EKRev. 0.1 96.5. Remotely Updating Firmware Using the BootloaderThe CP2201EB has a bootloader that can be used to update its firmware over the
Comments to this Manuals